Synthesis and Properties of Carbonized Silicate Ceramics
Abstract
Temperature treatment of compositions based on red clay, grinded wastes of basalt (tezontle) and cullet makes it possible to reduce the sintering temperature and sintering time of ceramic products of different applications within the framework of a traditional technology, i.e., realize an energy-saving technology. The principle of formation of low-temperature eutectics is the basis for the energy-saving technology. The use of biowaste of sewage water treatment plants (WAS) enables us to perform plastic formation of products without addition of free water, thereby realizing a water-saving technology. The sintering of mixtures under conditions of a shortage of oxygen (in argon) leads to the formation of carbonized porous ceramics. Depending on the sintering regime, ceramics of different application (from building ceramics to adsorbing ceramics) can be obtained.
Keywords
Full Text:
PDFReferences
Mangesh, V, Madurwar, Sachin, A, Mandavgane, Rahul, V, Ralegaonkar (2014). Use of sugarcane bagasse ash as brick material.Current Science, 107(6), 1044-1051. doi:10.18520/cs/v107/i6/1044-1051.
Madurwar, MV, Ralegaonkar, RV, Mandavgane, SA (2013). Application of agro-waste for sustainable construction materials: a review.Construction and Building Materials, 38, 872–878.
Faria, KCP, Gurgel, RF, Holanda, JNF. (2012). Recycling of sugarcane bagasse ash waste in the production of clay bricks. Journal of Environmental Managemen, 101, 7–12.doi: 10.1016/j.jenvman.2012.01.032.
Raut, SP, Sedmake, R, Dhunde, S, Ralegaonkar, RV, Mandavgane, SA (2012). Reuse of recycle paper mill waste in energy absorbing light weight bricks. Construction and Building Materials, 27, 247–251. doi: 4-1016/j.conbidmat 2011.07.053.
Sengupta, P, Saikia, N, Borthakur, P (2002). Bricks from petroleum effluent treatment plant sludge: properties and environmental characteristics. Journal of Environmental Engineering, ASCE, 128(11), 1090– 1094.doi:10.1061/(ASCE)0733- 9372(2002)128:11(1090).
Pinheiro, BCA, Holanda, JNF (2009). Processing of red ceramics incorporated with encapsulated petroleum waste. Journal of Materials Processing Technology, 209, 5606–5610. doi/abs/10.1177/0734242X12448517.
Demir, I (2008). Effect of organic residues addition on the technological properties of clay bricks.Waste management,28, 622-627.https://doi.org/10.1016/j.wasman.2007.03.019.
Vieira, CMF, Monteiro, SN (2009).Incorporation of solid wastes in red ceramics – an updated review. Matéria (Rio de Janeiro) 14(3) http://dx.doi.org/10.1590/S1517-70762009000300002.
Porous Ceramic Materials. Fabrication, Characterization, Applications (1996). Ed. Dean-Mo Liu, Key Engineering Materials, v. 115, 248 p.
Shinogi, Y, Yoshida, H, Koizumi, T (2003). Basic characteristics of low–temperature carbon products from waste sludge. Advances in Environmental Research, 661 – 665.doi: 10.1016/S1093-0191(02)00040-0.
Sassoni, E, Andreotti, S, Bellini, A ,Mazzanti,B, Chiara Bignozzi, M,Mazzotti, C, Franzoni, E (2017). Influence of mechanical properties, anisotropy, surface roughness and porosity of brick on FRP debonding force,
Composites, PartB: Engineering, 108(1), 257-269.doi.org/10.1016/j.compositesb.2016.10.020.
Karaman, S,Ersahin, S,Gunal, H (2006). Firing Temperature and Firing Time on mechanical and physical properties on clay bricks.Journal of Scientific and Industrial Research, 65, 153-159.
NonthaphongPhonphuaka, SakdipownThiansem(2011). Effects of charcoal on physical and mechanical properties of fired test briquettes.ScienceAsia, 37, 120–124.doi:10.2306/scienceasia1513-1874.2011.37.20.
NonthaphongPhonphuak (2013).Effects of Additive on the Physical and Thermal Conductivity of Fired Clay Brick.Journal of Chemical Science and Technology, 2 (2), 95-99.
Abdul, GL,Azni, I,Calvin,HKW, Abdul, AS,Megat, J, Noor, MM,Aminuddin, MB (2004). Incorporation of sewage sludge in clay brick and its characterization.Journal of Waste Management and Research,22, 226-233.
doi :10.1177/0734242X04044989.
Avgustinnik,AI (1975).Ceramics, Leningrad: Stroiizdat[in Russian].
Budnikov, PP (1964).The Technology of Ceramics and Refractories, Cambridge: The M.I.T. Press.doi: 10.1126/science.148.3670.621-a.
Salmang,H (1954)Diephysicalischen and chemischenGrundlagen der Keramik, Berlin-Gottingen-Heidelberg: DritteverbesserteAuflage.
Houseman, JE, Koenig, CJ (1971). Influence of Kiln Atmospheres in Firing Structural Clay Products: I, Maturation and Technological Properties.Journal of American Ceramical Society, 54 (2), 75-82.
Houseman, JE, Koenig, CJ (1971). Influence of Kiln Atmospheres in Firing Structural Clay Products: II, Color Development and Bumout. Journal of American Ceramical Society, 54 (2), 82-89.doi: 10.1111/j.1151-2916.1971.tb12224.x.
Kara-Sal, BK (2000). Influence of a gaseous atmosphere on the sintering of ceramic masses under decreased pressure.News of higher educational institutions. Series construction, 2-3, 44–47 [in Russian].
Kara-Sal, BK (2003). Intensification of sintering of clay rocks with a high iron content by changing the parameters of the calcination medium, Building Materials, 10, 43–48[in Russian].
Vlasova, M, Rosales, I,Kakazey, M, Parra Parra, A, Guardian, R (2011).Formation of Porous Ceramics Using Cullet and Biological Waste of Water Purification.Science of Sintering, 43, 81-94.doi:10.2298/SOS1101081V.
Vlasova, M, Parra Parra, A, Marquez Aguilar, PA, Kakazey, M (2011). Purification of sewage by porous materials obtained with using different types of waste.Journal of Applied Sciences in Environmental Sanitation,6 (2), 165-179.
Gonzalez Molinaz, V, Vlasova, M,Colin de la Cruz, J, Kakazey, M (2015). Desarrollo de tecnología production de ladrillos porosos en régimen de escasez de agua. Memorias del XXXVI Encuentro Nacional de la AMIDIQ,584-589.
González Molina,V, Vlasova,M,Márquez Aguilar, PA, Trujillo Estrada, A (2016) Uso de bioresiduos para preparacion de ladrilllos con aditivos. Memorias del XXXVII Encuentro Nacional de la AMIDIQ, MAT66- MAT71.
Demir, I (2009). Reuse of waste glass in building brick production.Journal of Waste Management and Research, 27, 572-577.doi: 10.1177/0734242X08096528.
Bernardo, E, Castellan, R, Hreglich, S, Lancellotti, I(2006). Sintered sanidine glass-ceramics from industrial wastes. Journal of the European Ceramic Society, 26, 3335–3341.
Bernardo, E, Castellan, R, Hreglich, S (2007) Sintered glass-ceramics from mixtures of wastes. Ceramics International, 33, 27–33.
Karamberi, A, Orkopoulos, K, Moutsatsou, A (2007). Synthesis of glass ceramics using glass cullet and vitrified industrial by-products. Journal of the European Ceramic Society, 27, 629–636.
Manukyan, RV,Davydova, NS (1996).Use of waste in the ceramic industry.Glass and Ceramics, 53, 247–248.doi.org/10.1007/BF01213781
Rambaldi, E, Tucci, A, Esposito, L (2004). Use of recycled materials in the traditional ceramic industry. Ceramics International, 1–2, 13–23.
Vlasova,M, Parra Parra, A, Márquez Aguilar,P A,Trujillo Estrada, A., González Molina, V, Kakazey, M, Tomila, T, Gómez-Vidales, V (2017).Closed Cycle of Recycling of Waste Activated Sludge,WasteManagement(in press)//doi.org/10.1016/j.wasman.2017.10.051.
BustosRiveraBahena C‚ Vlasova, M, Kakazey, M, Dominguez-Patino, G , Flores, R (2015). Carbonized tezontle and its adsorptive properties, International Journal of Research Studies in Science, Engineering and Technology, 2 (5),1-10.
Vlasova, M, BustosRivera-Bahena‚ C, Dominguez-Patino, G, Kakazey, M, Guardian Tapia, R (2015).Formation and properties of carbon in porous space of silica-alumina ceramics, Journal of Advances in Chemistry, 11 (7), 3729-3741.
Kosolapova, TYa,Andreeva, TV,Bartnitskaya, TC, Gnesin,G G,Makarenko,G N,Osipova,II,Prilutskiy, EV (1958). Nonmetallic Refractory Compounds, Moscow,Metallurgiya[in Russian].
Refbacks
- There are currently no refbacks.
Copyright (c) 2017 Journal of Progressive Research in Chemistry
Copyright © 2015 Journal of Progressive Research in Chemistry. All rights reserved.
ISSN: 2454-3136
For any help/support contact us at editorial@scitecresearch.com.