Application of Grey-Taguchi method for simultaneous optimization of multiple quality characteristics in lead-slag radiation shielding concrete
Abstract
Utilization of wastes and by-products as concrete aggregate has received increasing attention in the last few years. Lead slag extracted from recycling of the spent batteries, is one of these waste materials which have high potential and can be utilized as substitute of raw materials in construction of radiation shielding concrete. For utilization of lead slag as Radiation-shielding concrete aggregate, we should consider different criteria. Therefore, It is necessary to find an optimal mixture to produce Lead Slag radiation shielding concrete (LSRSC) with desired quality characteristics.
In the present work, Taguchi method in combination with grey relational analysis is applied to find the optimal mixture of LSRSC with multiple responses. In the application of this method, water/cement ratio, cement quantity, volume ratio of lead slag aggregate and Silica fume were selected as control factors with responses of slump, Unit weight, compressive strength and gamma attenuation coefficient to assess the optimal mixture of LSRSC. Results demonstrated that the optimal mixture of LSRSC has a water/cement ratio of 0.42, cement quantity of 390 kg, a volume fraction of lead slag aggregate of 60% and silica fume-cement ratio of 0.15.
Keywords
Full Text:
PDFReferences
Kaplan, M.F., Concrete radiation shielding. 1989.
Penpolcharoen, M., Utilization of secondary lead slag as construction material. Cement and concrete research, 2005. 35(6): p. 1050-1055.
Metwally, M., et al., Utilizing of slag produced from recycling of spent lead-batteries as concrete aggregate. Alex Eng J, 2005. 44(6): p. 883-892.
Atzeni, C., L. Massidda, and U. Sanna, Use of granulated slag from lead and zinc processing in concrete technology. Cement and concrete research, 1996. 26(9): p. 1381-1388.
Morrison, C., R. Hooper, and K. Lardner, The use of ferro-silicate slag from ISF zinc production as a sand replacement in concrete. Cement and Concrete research, 2003. 33(12): p. 2085-2089.
Zeli?, J., Properties of concrete pavements prepared with ferrochromium slag as concrete aggregate. Cement and concrete research, 2005. 35(12): p. 2340-2349.
Juenger, M., et al., Advances in alternative cementitious binders. Cement and Concrete Research, 2011. 41(12): p. 1232-1243.
Longo, A. and R. Torrent, Methods of addition of blast furnace slag: Their effect on the compressive strength of mortars and concretes. ACI Special Publication, 1986. 91.
de Brito, J. and N. Saikia, Recycled aggregate in concrete: use of industrial, construction and demolition waste. 2012: Springer.
Taguchi, G., D. Clausing, and L.T. Watanabe, System of experimental design: engineering methods to optimize quality and minimize costs. Vol. 1. 1987: UNIPUB/Kraus International Publications White Plains, NY.
Taguchi, G., Introduction to quality engineering: designing quality into products and processes. 1986.
Phadke, M.S., Quality engineering using robust design, prentice hall. Englewood Cliffs, NJ, 1989.
Lin, Y.-H., et al., An assessment of optimal mixture for concrete made with recycled concrete aggregates. Cement and concrete research, 2004. 34(8): p. 1373-1380.
Kuo, Y., T. Yang, and G.-W. Huang, The use of grey relational analysis in solving multiple attribute decision-making problems. Computers & Industrial Engineering, 2008. 55(1): p. 80-93.
?ahin, R., et al., Determination of transmission factors of concretes with different water/cement ratio, curing condition, and dosage of cement and air entraining agent. Annals of Nuclear Energy, 2011. 38(7): p. 1505-1511.
Chiang, Y.-M. and H.-H. Hsieh, The use of the Taguchi method with grey relational analysis to optimize the thin-film sputtering process with multiple quality characteristic in color filter manufacturing. Computers & Industrial Engineering, 2009. 56(2): p. 648-661.
DATTA, S. and S. SANKAR MAHAPATRA, Use of desirability function and principal component analysis in grey-Taguchi approach to solve correlated multi-response optimization in submerged arc welding. Journal of Advanced Manufacturing Systems, 2010. 9(02): p. 117-128.
Sathiya, P., et al., Optimization of laser butt welding parameters with multiple performance characteristics. Optics & laser technology, 2011. 43(3): p. 660-673.
Lin, C., Use of the Taguchi method and grey relational analysis to optimize turning operations with multiple performance characteristics. Materials and manufacturing processes, 2004. 19(2): p. 209-220.
Chang, C., et al., Application of a weighted Grey-Taguchi method for optimizing recycled aggregate concrete mixtures. Cement and concrete composites, 2011. 33(10): p. 1038-1049.
Ranjit, R., A primer on the Taguchi method. 1990: van Nostrand Reinhold.
Deng, J.-L., Introduction to grey system theory. The Journal of grey system, 1989. 1(1): p. 1-24.
ASTM-C150, Standard Specification for Portland Cement. 2004, ASTM International West Conshohocken, PA.
ASTM-C1240, Standard Specification for Silica Fume Used in Cementitious Mixtures. 2003, ASTM International West Conshohocken, P.
ASTM-C494, Standard Specification for Chemical Admixtures for Concrete. 2004, ASTM International West Conshohocken, PA.
ASTM-C127, Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate. 2003, ASTM International West Conshohocken, PA.
ASTM-C128, Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate. 2001, ASTM International West Conshohocken, PA.
EN-12390, Testing hardened concrete. 2002: British Standard Institution.
Refbacks
- There are currently no refbacks.
Copyright (c) 2015 Boson Journal of Modern Physics
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright. 2016 Boson Journal of Modern Physics. All rights reserved.
ISSN: 2454-8413.
For any help/support contact us at editorial@scitecresearch.com.